Request a call-back

GFCI Won't Reset in Wichita, KS?

A GFCI that will not reset may be doing its job because of a ground fault, or the device itself may have failed, or it may still be wet. Forcing it, or replacing it with a plain outlet, removes a protection that is there for a reason, especially in kitchens, baths and outdoor circuits.

Request a call-back

This is a free referral service that connects people in Wichita with independent local licensed electricians. We are not an electrical contractor and we do not do the work ourselves.

Free referral service. We connect you with an independent local electrician and do not do the work ourselves. Calls may be recorded.

What to do right now

  1. Press off, then reset, once. If it will not stay on, leave it.
  2. Unplug everything on that outlet and on other outlets that may be fed from it, then try one more reset.
  3. If the GFCI is outdoors or in a damp location, let it dry and do not use it in the rain. It may still need to be replaced.
  4. Do not replace a GFCI with a standard outlet just so the circuit stays on.
  5. Request a call-back and say whether a whole string of outlets went dead, and whether the device is in a kitchen, bath, garage or outdoors.

When this is an emergency

Smoke, fire, a downed line, or danger to life? Leave the area and call 911. For a downed power line, also call the electric utility. Do not wait on a referral call-back.

A failed GFCI with the circuit left off

If the device will not reset, you have unplugged loads, and nothing is wet, hot or scorched, you can usually request a same-day or next-available visit. Do not keep using other outlets on that circuit if they are dead or if you are not sure they are protected. Kitchens and bathrooms may be inconvenient without those outlets; say so in the request if that is a problem.

In Wichita

Older neighborhoods such as College Hill, Riverside, Delano and Linwood often have mid-century panels, original receptacles and fewer circuits than modern loads use.

Houses in and around Wichita sit on a mix of basements, crawl spaces and slabs, so some wiring runs through unfinished lower spaces where moisture and access both matter.

Related services

Related problems

In the Wichita area

We also refer people in these communities:

See the full service area.

See all common electrical problems in Wichita or the emergency electrician cost guide.

Common questions

Why did my kitchen outlets die when a bathroom GFCI tripped?

A GFCI can protect downstream outlets in other rooms. Resetting every GFCI in the house is a good first step. If it will not reset, those downstream outlets should stay unused until the cause is found.

Can a GFCI wear out?

Yes. They can fail with age, moisture, lightning or a serious fault. An electrician can replace it with the right type of device and check for a fault on the circuit.

Is it legal to swap in a regular outlet?

In locations that require GFCI protection, a regular outlet is not an acceptable substitute. Ask the electrician what the code requires in that spot.

Request a call-back

This is a free referral service that connects people in Wichita with independent local licensed electricians. We are not an electrical contractor and we do not do the work ourselves.