Flickering Lights in Wichita, KS?
Lights that dip when a large appliance starts can be normal on a heavily loaded circuit. Flicker in a whole house, flicker that is getting worse, or flicker with a burning smell or a buzzing panel is more serious and can point to a loose connection or a service problem.
Free referral service. We connect you with an independent local electrician and do not do the work ourselves. Calls may be recorded.
What to do right now
- Notice whether one fixture, one room or the whole house is affected, and whether it happens when a particular appliance starts.
- Try a different bulb in a single flickering fixture. A failing bulb or a loose lamp is a common, simple cause.
- If many lights flicker, or they flicker with a buzzing panel, a burning smell or dimming that does not stop, request a call-back and stop using heavy loads if you can.
- If neighbors' lights are also flickering, call the utility.
- Do not tighten connections in the panel yourself.
When this is an emergency
- Flickering along with a burning smell, a buzzing or hot panel, or scorch marks.
- Lights that go very dim, or half the house that seems to sag in brightness.
- Sparking at a fixture, a switch or the panel.
- Flicker that started just after a storm, along with a damaged mast or meter.
A single fixture or a brief dip when the AC starts
A single lamp with a failing bulb, or a brief, mild dip when the air conditioner starts, can often wait for a regular visit if nothing is getting worse. Whole-house flicker, worsening flicker, or any flicker with heat or odor should not wait.
In Wichita
Older neighborhoods such as College Hill, Riverside, Delano and Linwood often have mid-century panels, original receptacles and fewer circuits than modern loads use.
Wichita-area panels are often in a garage, basement, utility area or an interior wall. A panel in an unheated or occasionally damp garage should be kept dry and should not be ignored if it shows rust or corrosion.
Wichita thunderstorms, ice and high winds can damage outdoor electrical equipment and service masts. Mid-century houses may also have original panels and fewer circuits than modern loads use, which shows up as tripped breakers or warm outlets when a lot of appliances are running.
Related services
- Partial Power Outage — Part of the house has no power, or some rooms and appliances are dark while others are on.
- Electrical Panel Problems — A panel that is hot, buzzing, rusted, full, or that needs repair or replacement.
- Storm Electrical Damage — Power problems after a storm, a downed line, a surge, or water in electrical equipment.
Related problems
In the Wichita area
We also refer people in these communities:
- Derby, KS
- Andover, KS
- Maize, KS
- Goddard, KS
- Haysville, KS
- Park City, KS
- Bel Aire, KS
- Valley Center, KS
- Mulvane, KS
- College Hill, KS
- Riverside, KS
- Delano, KS
- Old Town, KS
- Planeview, KS
- Linwood, KS
- West Wichita, KS
- Northeast Wichita, KS
See the full service area.
See all common electrical problems in Wichita or the emergency electrician cost guide.
Common questions
Why do the lights dip when the air conditioner starts?
A large compressor can pull a lot of current for a moment. Mild, brief dimming can be normal. Severe or lasting dimming, or dimming that is new, is a reason to have the circuit, the panel or the service checked.
Can a loose bulb cause this?
Yes, in a single fixture. If more than one fixture is involved, look farther than the bulb.
Could this be the utility?
Yes, especially if neighbors are affected, if both 'sides' of the house seem uneven, or if the mast or meter was disturbed. Call the utility in those cases, and an electrician if the problem is on the house side.